• Balancer connection at top: Connection by shackles.
• Balancer connection at bottom: ICE-Connection links.
• Easy recognition of the limit tilt angle of 10° due to special shaping on the bottom of the balancer.
• Detailed information on the ICE-Balancer can be found in the operating manual.

PLEASE NOTE THE FOLLOWING WHEN USING

THE ICE-BALANCER SUSPENSION:

• The load must be symmetrical.
• The inclination angle β must not be greater than 45° (see diagrams 1 and 2).
• The inclination of the balancer must not be greater than 10° (see diagrams 3, 4 and 5).
• Detailed information on the ICE-Balancer can be found in the operating manual.
• Higher WLL at β = 15° or β = 30° see operating manual.

With a 4-strand suspension, a maximum of only 3 strands can be assumed to be load-bearing. In unfavourable cases only 2 strands are used.

Our TIP:

When using a 2 x 2-strand suspension in the configuration shown, an even load distribution to all 4 strands and a 33 % higher WLL than a standard 4-strand suspension.

DESIGN OF ICE-BALANCER HEAD IWK-2S

CONSISTING OF:

• IA link with IKZA.
• VIP-Shackles.
• ICE-Balancer.
• 2 ICE-Connecting links.